Piezoelectric force sensor, ring force transducer (Fz 400 kN / 89.9 klbf) / 9071C

Piezoelectric force sensor, ring force transducer (Fz 400 kN / 89.9 klbf)

9071C

ID:18037385

Piezoelectric force sensor with a measuring range of Fz: 0 ... 400 kN (89.9 klbf)
Calibrated ranges 0 ... 320 kN and 0 ... 32 kN
Dimensions D x d x H: 77.25 x 40.5 x 17 mm
Connector: KIAG 10-32 neg.

Availability

In Stock

List price On Request

Log in to myKistler to see prices

Standart Force Sensors

Nominal force

400 kN

Calibrated range 1

0 … 320 kN

Calibrated range 2

0 … 32 kN

Calibration preload

80 kN

Load limit

560 kN

Maximum bending moment

±2443 Nm

Temperature sensitivity, sensitivity change (-70°C … 200°C, Tref = 25°C)

±2.5 %

Natural frequency (free-free)

≥20 kHz

Axial stiffness

27.7 kN/μm

Bending stiffness

217 kNm/°

Shear stiffness

9 kN/μm

Torsional stiffness

190 kNm/°

Insulation resistance

≥10^13 Ω

Sensor material, cover plate

1.4821

Sensor material, coat

1.4542

Global attributes

Sensitivity

–4.4±0.2 pC/N

Operating temperature range

-70 … 200 °C

Output signal type

Charge (Piezoelectric, PE)

Applications

NVH testing

Force Sensors (Facets)

Preloaded sensor

No

Measuring range

0 … 400 kN

Maximum measuring range

400 kN

Force sensor type

Single axis force sensor

Strain Measuring Pins

Capacitance

303 pF

Piezoelectric force sensor, also known as piezoelectric ring force transducer, for precise measurement of tensile and compressive forces in highest resolution.This piezoelectric (PE) force sensor of the 90x1 series measures forces in the z-direction. The ring force transducer contains a quartz sensor element which measures the force directly transferred through the cover and base of the tightly welded steel case. When subjected to a mechanical load, quartz produces an electric charge that is proportional to that load. An outstanding property of quartz is the very low threshold and, thus, a high sensor sensitivity that remains extremely linear over the entire measuring range. Thus the behaviour in a certain measuring range is practically identical for all PE sensors, independent of their size.

Data sheet

Piezoelectric force sensors – Piezoelectric ring force transducers for tensile and compression forces from 7.5 kN to 1 200 kN

English

pdf

Please click here to log in to myKistler and you will be redirected.

Manual

Piezoelectric Force Sensors, Ring Force Transducers

English

pdf

Please click here to log in to myKistler and you will be redirected.

127 results

Accessory Type

These standardized pretensioning elements are used for mounting piezoelectric ring force transducers of Type 90x1C and 910xC.

Preloading sets for piezoelectric force sensors of Type 90x1C and 910xC for high loads

Preloading sets for piezoelectric force sensors of Type 90x1C and 910xC for high loads

High quality preloading set for piezoelectric force sensors of Types 9071C and 9107C

The contact surfaces have to be just as flat and stiff as the contact surfaces of the load cell itself. If they cannot be finished, local overstressing and damage to the force sensor's surface have to be prevented by using a force distributing ring.

Force distributing rings for piezoelectric force sensors of Types 90x1C and 910xC

Force distributing rings for piezoelectric force sensors of Types 90x1C and 910xC

Force distributing ring for piezoelectric force sensors of Types 9071C and 9107C

The force to be measured must be distributed evenly on the contact surface of the piezoelectric load cell. A force distributing cap ensures an ideal distribution, if a concentrated application of force cannot be avoided.

Force distributing caps for piezoelectric force sensors of Types 90x1C and 910xC

Force distributing caps for piezoelectric force sensors of Types 90x1C and 910xC

Force distributing cap for piezoelectric force sensors of Types 9071C and 9107C

These high-insulating connecting cables are used for piezoelectric sensors with a KIAG 10-32 neg. connector.

High-insulating connecting cables, KIAG 10-32 pos. - BNC pos., PFA green

High-insulating connecting cables, KIAG 10-32 pos. - BNC pos., PFA green

High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 0.5 m

High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 1 m

These high-insulating connecting cables are used for piezoelectric sensors with a KIAG 10-32 neg. connector.

High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green

High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green

High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, customer-specific length

High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, 5 m

These connecting cables are low-noise and high-insulation coaxial cables for use in drag-chains. Owing to their own properties, the cables are especially well suited for dynamic use.

Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cable for piezoelectric sensors, highly flexible, M4x0.35 pos. - KIAG 10-32 pos., 10 m

Connecting cable for piezoelectric sensors, highly flexible, M4x0.35 pos. - KIAG 10-32 pos., 5 m

Low-noise, oil-resistant, high-insulation coaxial cables with flexible mechanical protection. Owing to their properties, the cables are ideal for use in harsh machinery environments.

Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - BNC pos., length 0.3 to 20 m

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.3 to 20 m

These smart amplifiers combine analog and digital communication technology, thus paving the way for Industry 4.0.

Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)

Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)

Miniature industrial charge amplifier with IO-Link (mICA), ±100000 pC

Miniature industrial charge amplifier with IO-Link (mICA), ±500000 pC

Insulating washers for electric isolation

Insulating washers for electric isolation, for piezoelectric force sensors of Types 90x1C and 910xC

Insulating washers for electric isolation, for piezoelectric force sensors of Types 90x1C and 910xC

Insulating washers for electric isolation, for piezoelectric force sensors of Types 9071C and 9107C

The MiniAmp single channel, industrial charge amplifiers convert the charge signal from piezoelectric sensors into an inverted proportional voltage signal.

Industrial miniature charge amplifiers MiniAmp, ±10 V

Industrial miniature charge amplifiers MiniAmp, ±10 V

Industrial miniature charge amplifier MiniAmp, low range, ±1000 pC

Industrial miniature charge amplifier MiniAmp, medium range, ±10000 pC

This excellent charge amplifier is suitable for challenging measurements, e.g., in very sensitive low-noise applications with piezoelectric dynamometers.

Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifier, multi-channel, low noise, measuring ranges from ±2 to ±2200000 pC

These high insulation, low noise coaxial cables are suitable for piezoelectric force, torque and strain sensors.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 3 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.1 to 50 m

Green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. int. connector

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., length 0.1 to 20 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., 3 m

The industrial charge amplifiers for manufacturing applications (ICAM) convert a charge signal into an inverted low-impedance analog signal.

Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)

Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., voltage output ±10 V

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., current output 4 … 20 mA

These 1-channel laboratory charge amplifiers are suitable for generic measurement applications with piezoelectric sensors in the laboratory environment.

Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz

Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, rack module version, 230 V

Laboratory charge amplifier, 1-channel, rack module version, 115 V

These are green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. connector.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., length 0.1 to 50 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 5 m

At Jul 11, 2024

Green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. int. connector

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., 0.5 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., length 0.1 to 50 m

These charge amplifiers for low-noise applications are also suitable for engine combustion measurements.

Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC

Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC, Piezotron (IEPE) input

Measurement with piezoelectric sensors requires parallel surfaces. A spherical washer compensates unparallelities between sensor and measurement object. However a finished and even contact surface is still required.

Spherical washers for piezoelectric force sensors of Types 90x1C and 910xC

Spherical washers for piezoelectric force sensors of Types 90x1C and 910xC

Spherical washer for piezoelectric force sensors of Types 9071C and 9107C

The digital industrial charge amplifiers are universal devices for piezoelectric sensor signals which allow reliable and precise capture of dynamic and quasi-static processes on modern PLC systems via EtherCat, Ethernet/IP or ProfiNet.

Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet

Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet

Digital industrial charge amplifier (dICA), 1-channel, EtherCat

Digital industrial charge amplifier (dICA), 1-channel, Ethernet/IP