ComoNeo and ComoScout - process monitoring and control systems

With ComoNeo, Kistler offers a process monitoring and control system enabling a networked injection molding production.

Consistent digitization increases product quality and cost-effectiveness in injection molding production. The ComoNeo and ComoScout process monitoring system ensure that both newcomers and experienced users can monitor and control their processes precisely and efficiently.

TEST EN

ComoNeo is a process monitoring system which allows for – based on cavity pressure and mold temperatures – optimization, monitoring and documentation of injection molding processes.

Process monitoring and control system ComoNeo for injection molding, up to 32 cavity pressure and up to 16 temperature sensors

Process monitoring and control system ComoNeo for injection molding, up to 32 cavity pressure and up to 16 temperature sensors

Process monitoring and control system ComoNeo for injection molding, 8 cavity pressure sensors, 2 x 4-channel and 8 temperature sensors

Process monitoring and control system ComoNeo for injection molding, 8 cavity pressure sensors, 1 x 8-channel and 8 temperature sensors

The ComoNeo and ComoScout process monitoring and control systems can be controlled via an optional 15.6" capacitive touch display.

Touch display for ComoNeo and ComoScout process monitoring system

Touch display for ComoNeo and ComoScout process monitoring system

Touch display for ComoNeo and ComoScout process monitoring system

These extension cables with flexible steel-braided covering are used with the multi-channel connectors of Type 1710B for multi-cavity mold pressure measurement.

Extension cables for mold pressure sensors, 8-channel (to Type 1710B multi-channel connector)

Extension cables for mold pressure sensors, 8-channel (to Type 1710B multi-channel connector)

Extension cable, 8-channel, for mold pressure sensors with flexible steel-braided covering, 1 m

Extension cable, 8-channel, for mold pressure sensors with flexible steel-braided covering, 2 m

These extension cables with flexible steel-braided covering are used with the multi-channel connectors of Type 1708B for multi-cavity mold pressure measurement.

Extension cables for mold pressure sensors, 4-channel (to Type 1708B multi-channel connector)

Extension cables for mold pressure sensors, 4-channel (to Type 1708B multi-channel connector)

Extension cable, 4-channel, for mold pressure sensors with flexible steel-braided covering, 1 m

Extension cable, 4-channel, for mold pressure sensors with flexible steel-braided covering, 2 m

These adapter cables allow for connecting multiple cavity pressure sensors to a multi-channel connector (1708B or 1710B) and then to a charge amplifier, signal conditioner or the ComoNeo system.

Adapter cables for Type 1708B and 1710B multi-channel connectors, charge amplifier connection

Adapter cables for Type 1708B and 1710B multi-channel connectors, charge amplifier connection

Adapter cable, charge amplifier connection, multi-channel to single-channel technology, 4-channel to 4 x BNC, 0.5 m

Adapter cable, multi-channel to single-channel technology, 4-channel to 4 x BNC, 2 m

This inductive proximity switch is a device to connect a trigger signal to the ComoNeo process monitoring system.

Inductive proximity switch including connecting cable, 5 m

Inductive proximity switch including connecting cable, 5 m

Inductive proximity switch to connect to ComoNeo including connecting cable, 5 m

These adapter boxes are used to conventiently connect different types of cavity pressure sensors (single-channel, multi-channel) with ComoNeo.

Adapter boxes for connecting cavity pressure sensors to ComoNeo, single and multi-channel

Adapter boxes for connecting cavity pressure sensors to ComoNeo, single and multi-channel

Adapter box for connecting cavity pressure sensors to ComoNeo, single- to multi-channel technology, 4 channels to 4 x 1 channel BNC

Adapter box for connecting cavity pressure sensors to ComoNeo, single- to multi-channel technology, 8 channels to 8 x 1 channel BNC

Power supply for ComoNeo with country specific power cord

Power Supply for ComoNeo process monitoring system

Power Supply for ComoNeo process monitoring system

Power supply for ComoNeo process monitoring system

This cable connects the ComoNeo to the Type 2205 thermo amplifier with either a single 4-channel or a double 4-channel connector; length is freely configurable between 0.3 and 20 meters.

Connecting cables, from ComoNeo to thermo amplifier (Type 2205)

Connecting cables, from ComoNeo to thermo amplifier (Type 2205)

Connecting cable, from ComoNeo to thermo amplifier (Type 2205), 1 x 4 channel, 2 m

Connecting cable, from ComoNeo to thermo amplifier (Type 2205), 1 x 4 channel, 5 m

This connecting cable for digital or analog signals links the ComoNeo to the injection molding machine with a 9 or 15-pole connector and bare ends; length is freely configurable between 1 and 15 meters.

Connecting cables, from ComoNeo to injection molding machine

Connecting cables, from ComoNeo to injection molding machine

Connecting cable, from ComoNeo to injection molding machine, 9-pole (female) with bare ends, 7 m

Connecting cable, from ComoNeo to injection molding machine, 15-pole (female) with bare ends, 7 m

These adapter cables bridge multi-channel with single-channel technology and are available in different lenghts.

Adapter cables for mold pressure sensors, multi-channel to single-channel technology, 1-channel to 4-channel

Adapter cables for mold pressure sensors, multi-channel to single-channel technology, 1-channel to 4-channel

Adapter cable for mold pressure sensors, multi-channel to single-channel technology, 1-channel to 4-channel, 5 m

Adapter cable for mold pressure sensors, multi-channel to single-channel technology, 1-channel to 4-channel, 2 m

ComoScout is designed to monitor signals from the injection molding machine and evaluate deviations to part quality on this base.

Process monitoring and control system ComoScout for plastic injection molding processes

Process monitoring and control system ComoScout for plastic injection molding processes

Process monitoring and control system ComoScout for plastic injection molding processes with interface for 20 Voltage signals