Home/Products/Sensors/Force sensors/Multicomponent dynamometers, maximum forces up to 60 kN, cover plate 260x260 mm/9255C

Multicomponent dynamometer, 60 kN, cover plate 260x260 mm / 9255C

The multicomponent dynamometer is a high-precision measurement system for validating the stiffness of tire models.
9255C
18019612
  • Piezoelectric three-component dynamometer with force ranges Fx, Fy ±30 kN, Fz –10 … 60 kN
  • Cover plate 260x260 mm
  • Natural frequency fn (x), fn (y) 2.2 kHz, fn (z) 3.3 kHz
  • Fischer 9-pin flange connector
In Stock
On Request
Log in to myKistler to see prices
Standart Force Sensors
Overload Fz
–12/72 kN
Global attributes
Sensitivity
Fx: -7.8 pC/N, Fy: -7.8 pC/N, Fz: -3.9 pC/N
Threshold
<0.01 N
Operating temperature range
-20 … 70 °C
Hysteresis
≤0.5 %FSO
Degree of protection → EN 60529
IP67
Insulation resistance
>10^13 Ω
Applications
NVH testing, Tire testing, Cutting processes and machining development
Force Sensors (Facets)
Preloaded sensor
Preloaded sensors are already calibrated and therefore ready-to-use. Non-preloaded sensors are smaller.
No
Measuring range
Choose the category in which the max force value you want to measure falls in.
-10 … 60 kN
Maximum measuring range
60 kN
Force sensor type
Choose the category depending on the no. of axis you want to measure. A dynamometer is a force plate measuring forces and moments.
Multicomponent dynamomometer
Dynamometers
Calibrated partial measuring range Fz
0 … 6 kN
Calibrated range Fx, Fy
0 … 30 kN
Calibrated range Fz
0 … 60 kN
Overload Fx, Fy
±36 kN
Range Fx, Fy
-30 … 30 kN
Range Fz
-10 … 60 kN
Sensitivity Fx
≈–7.9 pC/N
Sensitivity Fy
≈–7.9 pC/N
Crosstalk Fx <-> Fy
≤±2%
Natural frequency mounted on flanges and through top plate fn(x)
≈2.2 kHz
Natural frequency mounted on flanges fn(x)
≈2.2 kHz
Natural frequency mounted on flanges fn(y)
≈1.8 kHz
Natural frequency mounted on flanges and through top plate fn(y)
≈2.2 kHz
Natural frequency mounted on flanges and through top plate fn(z)
≈3.3 kHz
Natural frequency mounted on flanges fn(z)
≈2.3 kHz
Rigidity Cx Cy
≈2 kN/μm
Rigidity Cz
≈3 kN/μm
Capacitance of channel
≈500 pF
Strain Measuring Pins
Ground insulation
>10^8 Ω
This is a piezoelectric three-component dynamometer for measuring the three orthogonal components of a force. The dynamometer has a great rigidity and consequently a high natural frequency. Its high resolution enables the smallest dynamic changes in large forces to be measured.
Data sheet
Multicomponent Dynamometer - –10 ... 60 kN, Top Plate 260x260 mm
English
pdf
Please click here to log in to myKistler and you will be redirected.
Manual
Quartz 3-Component Dynamometer Type 9255C
English
pdf
Please click here to log in to myKistler and you will be redirected.
0 results
Accessory Type