Accelerometer cables for piezoelectric sensors, 1/4 - 28, 4-pin neg. - 3 x BNC pos. or 3 x 10 - 32 pos. / 1756C

Kistler provides cables for triaxial accelerators to be applied in engine and powertrain NVH testing.

1756C

Family Type 1756C are white, fluoropolymer based cables (ø2.5 mm) for sensors with 1/4 – 28, 4-pin positive connectors.

Main features / advantages

Cable jacket material: fluoropolymer
Cable connectors: 1/4 – 28, 4 pin neg. to 3 x BNC pos., 3 x 10 - 32 pos., or offenen Enden
L = 1, 3, 5, or 10 m or custom (up to 20 m max.)
Option: low-outgassing materials

These signal output cables are suitable for triaxial voltage mode accelerometers.

Cable for voltage mode IEPE triaxial accelerometers, 5 m

Cable for voltage mode IEPE triaxial accelerometers, 3 m

Cable for voltage mode IEPE triaxial accelerometers, 10 m

Cable for voltage mode IEPE triaxial accelerometers, 3 m

Cable for voltage mode IEPE triaxial accelerometers, 5 m

Cable for voltage mode IEPE triaxial accelerometers, 10 m

Cable for voltage mode IEPE triaxial accelerometers, 20 m

Cable for voltage mode IEPE triaxial accelerometers, 1 m

Cable for voltage mode IEPE triaxial accelerometers, custom length

Cable for voltage mode IEPE triaxial accelerometers, custom length

Cable for voltage mode IEPE triaxial accelerometers, custom length

Cable for voltage mode IEPE triaxial accelerometers, low outgassing, custom length

Data sheet

Cables & connector adapters for accelerometers & selected pressure & force sensors

English

pdf

Please click here to log in to myKistler and you will be redirected.