Cables

A must for piezoelectric sensors and charge amplifiers: highly insulating cables from Kistler.

Unlike conventional coaxial cables, the innermost core of a high-insulation cable is insulated with PTFE. This allows the drift effect to be reduced to a minimum. A special graphite coating also minimizes the triboelectric effect. Numerous versions are available for the outer insulation, each with different properties.

These high-insulating connecting cables are used for piezoelectric sensors with a KIAG 10-32 neg. connector.

High-insulating connecting cables, KIAG 10-32 pos. - BNC pos., PFA green

High-insulating connecting cables, KIAG 10-32 pos. - BNC pos., PFA green

High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 0.5 m

High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 1 m

These high insulation, low noise coaxial cables are suitable for piezoelectric force, torque and strain sensors.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 0.5 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 1 m

These connecting cables are low-noise and high-insulation coaxial cables for use in drag-chains. Owing to their own properties, the cables are especially well suited for dynamic use.

Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cable for piezoelectric sensors, highly flexible, KIAG 10-32 pos. - KIAG 10-32 pos., 1 m

At Jul 10, 2024

Connecting cable for piezoelectric sensors, highly flexible, KIAG 10-32 pos. - KIAG 10-32 pos., 2 m

These high-insulating connecting cables are used for piezoelectric sensors with a BNC neg. connector.

High-insulating connecting cables, BNC pos. - BNC pos., PVC black

High-insulating connecting cables, BNC pos. - BNC pos., PVC black

High-insulating connecting cable, BNC pos. - BNC pos., PVC black, 0.5 m

High-insulating connecting cable, BNC pos. - BNC pos., PVC black, 10 m

Multi-wire, high insulation, PFA based cables with synthetic or steel braiding and a high degree of protection up to IP68.

Connecting cables (PFA) for triaxial force sensors with V3 neg. connector

Connecting cables (PFA) for triaxial force sensors with V3 neg. connector

Connecting cable for triaxial force sensors, V3, 3 x BNC pos.

Connecting cable for triaxial force sensors, V3, 3 x BNC pos.

These connecting cables are suitable for multicomponent dynamometers thanks to high insulation (10^13 Ω) and metal sheath, 8 conductors.

Connecting cables for multicomponent dynamometers, 8 conductors, Fischer flange 9-pole neg.

Connecting cables for multicomponent dynamometers, 8 conductors, Fischer flange 9-pole neg.

Connecting cable for multicomponent dynamometers, 8 conductors, Fischer flange 9-pole neg.

These are green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. connector.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 2 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 1 m

These high-insulating connecting cables are used for piezoelectric sensors with a KIAG 10-32 neg. connector.

High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green

High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green

High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, 0.5 m

High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, 1 m

These connecting cables are for multicomponent dynamometers with a high insulation (10^13 Ω) and metal sheath. They have 3 conductors.

Connecting cables for multicomponent dynamometers, Fischer flange 9-pole neg. connector, 3 conductors

Connecting cables for multicomponent dynamometers, Fischer flange 9-pole neg. connector, 3 conductors

Connecting cable for multicomponent dynamometer, angled Fischer flange 9-pole neg. connector, 3 conductors

Low-noise, oil-resistant, high-insulation coaxial cables with flexible mechanical protection. Owing to their properties, the cables are ideal for use in harsh machinery environments.

Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - BNC pos., 2 m

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - BNC pos., 3 m

Multi-wire, high insulation, TPC based cables (ø3,6 mm), thin and flexible with a high degree of protection up to IP68.

Connecting cables (TPC black) for triaxial force sensors with V3 neg. connector

Connecting cables (TPC black) for triaxial force sensors with V3 neg. connector

Connecting cable for triaxial force sensors, V3, Fischer 9-pole pos.

Connecting cable for triaxial force sensors, V3, Fischer 9-pole pos.

Multi-wire, high insulation, PFA based cables (ø2 mm) with synthetic braiding

Connecting cables (PFA) for 2-axis sensors with V3 neg. connector

Connecting cables (PFA) for 2-axis sensors with V3 neg. connector

Connecting cable for 2-axis force sensors, V3, 2 x BNC pos.

At Jul 10, 2024

Connecting cable for 2-axis force sensors, V3, 2 x KIAG 10-32 pos.