Piezoelectric force sensor, ring force transducer (Fz 20 kN / 4.49 klbf) / 9101C
![9101C Piezoelectric force sensor, ring force transducer (Fz 20 kN / 4.49 klbf)](https://kistler-test.cdn.celum.cloud/SAPCommerce_Product_345x345/9101C.webp)
9101C
18037373
- Piezoelectric force sensor with a measuring range of Fz: 0 ... 20 kN (4.49 klbf)
- Dimensions D x d x H: 14.5 x 6.5 x 8 mm
- Connector: KIAG 10-32 neg.
- Tested, uncalibrated
요청 시
요청 시
Standart Force Sensors
Nominal force
20 kNLoad limit
25 kNMaximum bending moment
22 NmTemperature sensitivity
±1.5 %Repeatability
0.07 %Reproducibility
0.25 %Torsion stiffness
385 Nm/°Insulation resistance
≥5*10^13 ΩSensor material, cover plate
1.4821Sensor material, coat
1.4542Piezoelectric force sensor, also known as piezoelectric ring force transducer, for precise measurement of tensile and compressive forces in highest resolution. The force sensor is thoroughly tested but delivered without calibration certificate and must be calibrated on site after installation.This piezoelectric (PE) force sensor of the 910x family measures forces in the z-direction. These ring force transducers contain a quartz sensor element which measures the force directly transferred to the quartz element located within the sensor. When subjected to a mechanical load, quartz produces an electric charge that is proportional to that load. An outstanding property of quartz is the very low threshold, resulting in a high sensor sensitivity which is extremely linear over the entire measuring range. Thus the behaviour in a certain measuring range is practically identical for all PE sensors, independent of their size.
데이터 시트
영어
pdf
여기를 클릭하여 myKistler에 로그인하면 리디렉션됩니다.
설명서
Piezoelectric Force Sensors, Ring Force Transducers
영어
pdf
여기를 클릭하여 myKistler에 로그인하면 리디렉션됩니다.
128 결과
액세서리 유형