Home/Products/Systems and data acquisition/INSPECT - process inspection in fastener assembly

INSPECT - process inspection in fastener assembly

INSPECT systems from Kistler monitor, inspect and document the complete fastening process to assure quality.

Efficient testing of the fastening process allows it to be permanently optimized. In addition, a high level of quality assurance is achieved and productivity is increased. Our INSPECT inspection systems monitor the entire bolting process, check and document all process parameters and provide proof of the quality of the bolted joint.

Categories & Filter
The electronic torque wrenches are hand tools for fastening and checking bolted joint connections in various procedures. The measured values can be evaluated and archived using the software platforms CEUS and testXpert.
Electronic torque wrenches INSPECTOR
Electronic torque wrenches INSPECTOR
5413-5103
5413-5103/
Torque wrench INSPECTOR
Price
On Request
Availability
On Request
The mobile INSPECTpro measuring and evaluation systems are portable and battery-powered units for recording analog and incremental measurands. The (random-sample) tests can be performed, analyzed and documented quickly and effectively and thereby contribute to optimum quality.
Mobile measuring and evaluation system INSPECTpro for process inspection and quality monitoring
Mobile measuring and evaluation system INSPECTpro for process inspection and quality monitoring
5413-2071
5413-2071/
Mobile measuring and evaluation unit INSPECTpro
Price
On Request
Availability
On Request
The main applications of the wireless torque wrenches are torque and angle of rotation measurements, as well as the special functions associated with the measuring and evaluation unit INSPECTpro.
Analysis wrenches, wireless handheld torque and angle of rotation wrenches
Analysis wrenches, wireless handheld torque and angle of rotation wrenches
5413-1500-W
Analyse-Wrench 5413-1500/15-W 15N·m
Analysis wrench, wireless handheld torque and angle of rotation wrench, 15 Nm
Price
On Request
Availability
On Request
Analyse-Wrench 5413-1500/50-W 50N·m
Analysis wrench, wireless handheld torque and angle of rotation wrench, 50 Nm
Price
On Request
Availability
On Request
These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V.
Torque sensors with fixed measuring shaft
Torque sensors with fixed measuring shaft
5413-1030
T-Sensor 5413-1030/1 1N·m 1/4"
Torque sensor with fixed measuring shaft, nominal value 1 Nm
Price
On Request
Availability
On Request
T-Sensor 5413-1030/5 5N·m 1/4"
Torque sensor with fixed measuring shaft, nominal value 5 Nm
Price
On Request
Availability
On Request
The main applications of the analysis wrenches are torque and angle of rotation measurements, as well as the special functions associated with the measuring and evaluation unit INSPECTpro.
Analysis wrenches, handheld torque and angle of rotation wrenches
Analysis wrenches, handheld torque and angle of rotation wrenches
5413-1500
Analyse-Wrench 5413-1500/15 15N·m
Analysis wrench, handheld torque and angle of rotation wrench, 15 Nm
Price
On Request
Availability
On Request
Analyse-Wrench 5413-1500/50 50N·m
Analysis wrench, handheld torque and angle of rotation wrench, 50 Nm
Price
On Request
Availability
On Request
These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.
Torque sensors with rotating measuring shaft
Torque sensors with rotating measuring shaft
5413-1100
T-Sensor 5413-1100/1 1N·m 1/4"
Torque sensor with rotating measuring shaft and cable, nominal value 1 Nm
Price
On Request
Availability
On Request
T-Sensor 5413-1100/5 5N·m 1/4"
Torque sensor with rotating measuring shaft and cable, nominal value 5 Nm
Price
On Request
Availability
On Request
The clamping force sensors operate according to the strain gauge principle and supply an analog output signal in mV/V.
Clamping force sensors for coefficient of friction testing of bolts and nuts
Clamping force sensors for coefficient of friction testing of bolts and nuts
5413-1952
F-Sensor 5413-1952/100 100kN
Clamping force sensor, nominal value 100 kN
Price
On Request
Availability
On Request
F-Sensor 5413-1952/25 25kN
Clamping force sensor, nominal value 25 kN
Price
On Request
Availability
On Request
These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.
Torque sensors with rotating measuring shaft and hex connection
Torque sensors with rotating measuring shaft and hex connection
5413-1151
T-Sensor 5413-1151/5 5N·m 1/4"6kt
Torque sensor with rotating measuring shaft, hex drive and cable, 5 Nm
Price
On Request
Availability
On Request
T-Sensor 5413-1151/10 10N·m 1/4"6kt
Torque sensor with rotating measuring shaft, hex drive and cable, 10 Nm
Price
On Request
Availability
On Request
These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.
Torque sensors with rotating measuring shaft in slim design
Torque sensors with rotating measuring shaft in slim design
5413-1160
T-Sensor 5413-1160/1 1N·m 1/4"
Torque sensor in slim design, with cable, nominal value 1 Nm
Price
On Request
Availability
On Request
T-Sensor 5413-1160/2 2N·m 1/4"
Torque sensor in slim design, with cable, nominal value 2 Nm
Price
On Request
Availability
On Request
The torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque and angle sensors have an integrated angle of rotation measurement.
Torque and angle of rotation sensors with rotating measuring shaft
Torque and angle of rotation sensors with rotating measuring shaft
5413-1200
T/Ang-Sensor 5413-1200/1 1N·m 1/4"
Torque and angle of rotation sensor with rotating measuring shaft and cable, 1 Nm
Price
On Request
Availability
On Request
T/Ang-Sensor 5413-1200/2 2N·m 1/4"
Torque and angle of rotation sensor with rotating measuring shaft and cable, 2 Nm
Price
On Request
Availability
On Request
The Kistler software testXpert has been specifically designed for standard-compliant and documented testing of bolted joints.
Windows software testXpert for bolted joints testing
Windows software testXpert for bolted joints testing
testXpert-Software
testXpert®-Software update
Software testXpert, update
Price
On Request
Availability
On Request
testXpert®-Software
Software testXpert for bolted joints testing
Price
On Request
Availability
On Request
The torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque and angle sensors have an integrated angle of rotation measurement.
Torque and angle of rotation sensors with rotating measuring shaft with hex connection
Torque and angle of rotation sensors with rotating measuring shaft with hex connection
5413-1251
T/Ang-Sensor 5413-1251/5 5N·m 1/4"6kt
Torque and angle of rotation sensor with rotating measuring shaft, hex drive and cable, 5 Nm
Price
On Request
Availability
On Request
T/Ang-Sensor 5413-1251/10 10N·m 1/4"6kt
Torque and angle of rotation sensor with rotating measuring shaft, hex drive and cable, 10 Nm
Price
On Request
Availability
On Request