INSPECT - process inspection in fastener assembly

キスラーのINSPECTシステムは、締結プロセス全体を監視、検査、文書化し、品質を保証します。

Efficient testing of the fastening process allows it to be permanently optimized. In addition, a high level of quality assurance is achieved and productivity is increased. Our INSPECT inspection systems monitor the entire bolting process, check and document all process parameters and provide proof of the quality of the bolted joint.

The electronic torque wrenches are hand tools for fastening and checking bolted joint connections in various procedures. The measured values can be evaluated and archived using the software platforms CEUS and testXpert.

Electronic torque wrenches INSPECTOR

Electronic torque wrenches INSPECTOR

Torque wrench INSPECTOR

ご要望に応じて

ご要望に応じて

The mobile INSPECTpro measuring and evaluation systems are portable and battery-powered units for recording analog and incremental measurands. The (random-sample) tests can be performed, analyzed and documented quickly and effectively and thereby contribute to optimum quality.

Mobile measuring and evaluation system INSPECTpro for process inspection and quality monitoring

Mobile measuring and evaluation system INSPECTpro for process inspection and quality monitoring

Mobile measuring and evaluation unit INSPECTpro

ご要望に応じて

ご要望に応じて

The main applications of the wireless torque wrenches are torque and angle of rotation measurements, as well as the special functions associated with the measuring and evaluation unit INSPECTpro.

Analysis wrenches, wireless handheld torque and angle of rotation wrenches

Analysis wrenches, wireless handheld torque and angle of rotation wrenches

Analyse-Wrench 5413-1500/15-W 15N·m

Analysis wrench, wireless handheld torque and angle of rotation wrench, 15 Nm

ご要望に応じて

ご要望に応じて

Analyse-Wrench 5413-1500/50-W 50N·m

Analysis wrench, wireless handheld torque and angle of rotation wrench, 50 Nm

ご要望に応じて

ご要望に応じて

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V.

Torque sensors with fixed measuring shaft

Torque sensors with fixed measuring shaft

T-Sensor 5413-1030/1 1N·m 1/4"

Torque sensor with fixed measuring shaft, nominal value 1 Nm

ご要望に応じて

ご要望に応じて

T-Sensor 5413-1030/5 5N·m 1/4"

Torque sensor with fixed measuring shaft, nominal value 5 Nm

ご要望に応じて

ご要望に応じて

Analysis wrenches, handheld torque and angle of rotation wrenches

Analysis wrenches, handheld torque and angle of rotation wrenches

Analyse-Wrench 5413-1500/15 15N·m

Analysis wrench, handheld torque and angle of rotation wrench, 15 Nm

ご要望に応じて

ご要望に応じて

Analyse-Wrench 5413-1500/50 50N·m

Analysis wrench, handheld torque and angle of rotation wrench, 50 Nm

ご要望に応じて

ご要望に応じて

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.

Torque sensors with rotating measuring shaft

Torque sensors with rotating measuring shaft

T-Sensor 5413-1100/1 1N·m 1/4"

Torque sensor with rotating measuring shaft and cable, nominal value 1 Nm

ご要望に応じて

ご要望に応じて

T-Sensor 5413-1100/5 5N·m 1/4"

Torque sensor with rotating measuring shaft and cable, nominal value 5 Nm

ご要望に応じて

ご要望に応じて

The clamping force sensors operate according to the strain gauge principle and supply an analog output signal in mV/V.

Clamping force sensors for coefficient of friction testing of bolts and nuts

Clamping force sensors for coefficient of friction testing of bolts and nuts

F-Sensor 5413-1952/100 100kN

Clamping force sensor, nominal value 100 kN

ご要望に応じて

ご要望に応じて

F-Sensor 5413-1952/25 25kN

Clamping force sensor, nominal value 25 kN

ご要望に応じて

ご要望に応じて

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.

Torque sensors with rotating measuring shaft and hex connection

Torque sensors with rotating measuring shaft and hex connection

T-Sensor 5413-1151/5 5N·m 1/4"6kt

Torque sensor with rotating measuring shaft, hex drive and cable, 5 Nm

ご要望に応じて

ご要望に応じて

T-Sensor 5413-1151/10 10N·m 1/4"6kt

Torque sensor with rotating measuring shaft, hex drive and cable, 10 Nm

ご要望に応じて

ご要望に応じて

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.

Torque sensors with rotating measuring shaft in slim design

Torque sensors with rotating measuring shaft in slim design

T-Sensor 5413-1160/1 1N·m 1/4"

Torque sensor in slim design, with cable, nominal value 1 Nm

ご要望に応じて

ご要望に応じて

T-Sensor 5413-1160/2 2N·m 1/4"

Torque sensor in slim design, with cable, nominal value 2 Nm

ご要望に応じて

ご要望に応じて

The torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque and angle sensors have an integrated angle of rotation measurement.

Torque and angle of rotation sensors with rotating measuring shaft

Torque and angle of rotation sensors with rotating measuring shaft

T/Ang-Sensor 5413-1200/1 1N·m 1/4"

Torque and angle of rotation sensor with rotating measuring shaft and cable, 1 Nm

ご要望に応じて

ご要望に応じて

T/Ang-Sensor 5413-1200/2 2N·m 1/4"

Torque and angle of rotation sensor with rotating measuring shaft and cable, 2 Nm

ご要望に応じて

ご要望に応じて

キスラーのソフトウェアtestXpertは、ボルト接合部の規格に準拠した文書化された試験用に特別に設計されています。

Windows software testXpert for bolted joints testing

Windows software testXpert for bolted joints testing

testXpert-Software

testXpert®-Software update

Software testXpert, update

ご要望に応じて

ご要望に応じて

testXpert®-Software

Software testXpert for bolted joints testing

ご要望に応じて

ご要望に応じて

The torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque and angle sensors have an integrated angle of rotation measurement.

Torque and angle of rotation sensors with rotating measuring shaft with hex connection

Torque and angle of rotation sensors with rotating measuring shaft with hex connection

T/Ang-Sensor 5413-1251/5 5N·m 1/4"6kt

Torque and angle of rotation sensor with rotating measuring shaft, hex drive and cable, 5 Nm

ご要望に応じて

ご要望に応じて

T/Ang-Sensor 5413-1251/10 10N·m 1/4"6kt

Torque and angle of rotation sensor with rotating measuring shaft, hex drive and cable, 10 Nm

ご要望に応じて

ご要望に応じて