Piezoelectric load cell, force transducer (Fz ±3 kN / ±0.674 klbf) / 9301C

Piezoelectric load cell, force transducer (Fz ±3 kN / ±0.674 klbf)

9301C

ID:18037809

Piezoelectric force transducer with a measuring range of Fz: -3 ... 3 kN (±0.674 klbf)
Dimensions D x H: 11 x 25 mm
Female screw thread: M5x0.8
Connector: KIAG 10-32 neg.

Availability

In Stock

List price On Request

Log in to myKistler to see prices

Standart Force Sensors

Nominal force

±3 kN

Calibrated range 1

0 … 3 kN

Calibrated range 2

0 … 0.03 kN

Calibrated range 3

0 … -3 kN

Maximum force

±3.3 kN

Maximum bending moment (Fz=0)

4.2 Nm

Temperature sensitivity, sensitivity change (-40°C … 120°C, Tref = 25°C)

±2.5 %

Natural frequency (free-free) f0fz

58.5 kHz

Axial stiffness

245 kN/μm

Bending stiffness

0.022 kNm/°

Shear stiffness

0.022 kN/μm

Torsional stiffness

0.015 kNm/°

Sensor capacitance

13.5±1 pF

Ground insulation resistance

≥100 MΩ

Insulation resistance

≥10^13 Ω

Global attributes

Sensitivity

–3.1±0.3 pC/N

Operating temperature range

-40 … 120 °C

Output signal type

Charge (Piezoelectric, PE)

Applications

In- and end-of-line testing for production processes

Force Sensors (Facets)

Preloaded sensor

Yes

Measuring range

-3 … 3 kN

Maximum measuring range

3 kN

Force sensor type

Single axis force sensor

A piezoelectric load cell, also known as force transducer or force link, measures dynamic or quasistatic forces, both tensile and compression. This load cells contains a piezoelectric ring force transducer of the 90x1C sensor family which is preloaded and calibrated, thus ready to use immediately. Sensors in the 93x1C load cell family are the easiest way to measure forces piezoelectrically without the need for sophisticated installation and calibration. These force transducers are factory calibrated and preloaded to measure both tension and compression forces. The load cell is ready to measure within minutes and provide accurate data from dynamic or quasistatic processes. In addition, these force transducers have been installed in an electrically isolated manner, so that ground loops are largely eliminated.

Data sheet

Piezoelectric Load Cells - for measuring dynamic and quasistatic tensile and compression forces

English

pdf

Please click here to log in to myKistler and you will be redirected.

Manual

Piezoelectric Load Cells

English

pdf

Please click here to log in to myKistler and you will be redirected.

124 results

Accessory Type

These high-insulating connecting cables are used for piezoelectric sensors with a KIAG 10-32 neg. connector.

High-insulating connecting cables, KIAG 10-32 pos. - BNC pos., PFA green

High-insulating connecting cables, KIAG 10-32 pos. - BNC pos., PFA green

High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 0.5 m

High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 1 m

These high-insulating connecting cables are used for piezoelectric sensors with a KIAG 10-32 neg. connector.

High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green

High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green

High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, customer-specific length

High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, 5 m

These connecting cables are low-noise and high-insulation coaxial cables for use in drag-chains. Owing to their own properties, the cables are especially well suited for dynamic use.

Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cable for piezoelectric sensors, highly flexible, M4x0.35 pos. - KIAG 10-32 pos., 10 m

Connecting cable for piezoelectric sensors, highly flexible, M4x0.35 pos. - KIAG 10-32 pos., 5 m

The force to be measured must be distributed evenly on the contact surface of the piezoelectric load cell. A force distributing cap ensures an ideal distribution, if a concentrated application of force cannot be avoided.

Force distributing caps for piezoelectrical load cells of Types 9313AAX and 93X1C

Force distributing caps for piezoelectrical load cells of Types 9313AAX and 93X1C

Force distributing cap for piezoelectrical load cell of Type 9301C

Flanges for optimum force introduction.

Flanges for optimum force introduction, for piezoelectric load cells Type 93x1C

Flanges for optimum force introduction, for piezoelectric load cells Type 93x1C

Flange for optimum force introduction, for piezoelectric load cell Type 9301C

Low-noise, oil-resistant, high-insulation coaxial cables with flexible mechanical protection. Owing to their properties, the cables are ideal for use in harsh machinery environments.

Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - BNC pos., length 0.3 to 20 m

Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.3 to 20 m

These smart amplifiers combine analog and digital communication technology, thus paving the way for Industry 4.0.

Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)

Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)

Miniature industrial charge amplifier with IO-Link (mICA), ±100000 pC

Miniature industrial charge amplifier with IO-Link (mICA), ±500000 pC

The MiniAmp single channel, industrial charge amplifiers convert the charge signal from piezoelectric sensors into an inverted proportional voltage signal.

Industrial miniature charge amplifiers MiniAmp, ±10 V

Industrial miniature charge amplifiers MiniAmp, ±10 V

Industrial miniature charge amplifier MiniAmp, low range, ±1000 pC

Industrial miniature charge amplifier MiniAmp, medium range, ±10000 pC

This excellent charge amplifier is suitable for challenging measurements, e.g., in very sensitive low-noise applications with piezoelectric dynamometers.

Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifier, multi-channel, low noise, measuring ranges from ±2 to ±2200000 pC

These high insulation, low noise coaxial cables are suitable for piezoelectric force, torque and strain sensors.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 3 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.1 to 50 m

Green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. int. connector

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., length 0.1 to 20 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., 3 m

The industrial charge amplifiers for manufacturing applications (ICAM) convert a charge signal into an inverted low-impedance analog signal.

Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)

Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., voltage output ±10 V

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., current output 4 … 20 mA

These 1-channel laboratory charge amplifiers are suitable for generic measurement applications with piezoelectric sensors in the laboratory environment.

Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz

Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, rack module version, 230 V

Laboratory charge amplifier, 1-channel, rack module version, 115 V

These are green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. connector.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., length 0.1 to 50 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 5 m

Green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. int. connector

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos.

Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos.

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., 0.5 m

Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., length 0.1 to 50 m

These charge amplifiers for low-noise applications are also suitable for engine combustion measurements.

Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC

Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC, Piezotron (IEPE) input

The digital industrial charge amplifiers are universal devices for piezoelectric sensor signals which allow reliable and precise capture of dynamic and quasi-static processes on modern PLC systems via EtherCat, Ethernet/IP or ProfiNet.

Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet

Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet

Digital industrial charge amplifier (dICA), 1-channel, EtherCat

Digital industrial charge amplifier (dICA), 1-channel, Ethernet/IP