Home/Products/Sensors/Force sensors/Piezoelectric load cells, force transducers (Fz max ±6 kN / ±1.35 klbf)/9371C

Piezoelectric load cell, force transducer (Fz ±160 kN / ±36 klbf) / 9371C

Piezoelectric load cell, force transducer (Fz ±160 kN / ±36 klbf)
9371C
18037816
  • Piezoelectric force transducer with a measuring range of Fz: -160 ... 160 kN (±36 klbf)
  • Dimensions D x H: 76 x 108 mm
  • Female screw thread: M30x3.5
  • Connector: KIAG 10-32 neg.
In Stock
On Request
Log in to myKistler to see prices
Standart Force Sensors
Nominal force
±160 kN
Calibrated range 1
0 … 160 kN
Calibrated range 2
0 … 1.6 kN
Calibrated range 3
0 … -160 kN
Maximum force
±176 kN
Maximum bending moment (Fz=0)
1955 Nm
Temperature sensitivity, sensitivity change (-40°C … 120°C, Tref = 25°C)
±1.5 %
Natural frequency (free-free) f0fz
19.9 kHz
Axial stiffness
4794 kN/μm
Bending stiffness
28.411 kNm/°
Shear stiffness
0.733 kN/μm
Torsional stiffness
21.231 kNm/°
Sensor capacitance
303±20 pF
Ground insulation resistance
≥100 MΩ
Insulation resistance
≥10^13 Ω
Global attributes
Sensitivity
–3.9±0.3 pC/N
Operating temperature range
-40 … 120 °C
Output signal type
TEST
Charge (Piezoelectric, PE)
Applications
In- and end-of-line testing for production processes
Force Sensors (Facets)
Preloaded sensor
Preloaded sensors are already calibrated and therefore ready-to-use. Non-preloaded sensors are smaller.
Yes
Measuring range
Choose the category in which the max force value you want to measure falls in.
-160 … 160 kN
Maximum measuring range
160 kN
Force sensor type
Choose the category depending on the no. of axis you want to measure. A dynamometer is a force plate measuring forces and moments.
Single axis force sensor
A piezoelectric load cell, also known as force transducer or force link, measures dynamic or quasistatic forces, both tensile and compression. This load cells contains a piezoelectric ring force transducer of the 90x1C sensor family which is preloaded and calibrated, thus ready to use immediately. Sensors in the 93x1C load cell family are the easiest way to measure forces piezoelectrically without the need for sophisticated installation and calibration. These force transducers are factory calibrated and preloaded to measure both tension and compression forces. The load cells are ready to measure within minutes and provide accurate data from dynamic or quasistatic processes. In addition, these force transducers have been installed in an electrically isolated manner, so that ground loops are largely eliminated.
Data sheet
Piezoelectric Load Cells - for measuring dynamic and quasistatic tensile and compression forces
English
pdf
Please click here to log in to myKistler and you will be redirected.
Manual
Piezoelectric Load Cells
English
pdf
Please click here to log in to myKistler and you will be redirected.
124 results
Accessory Type
These high-insulating connecting cables are used for piezoelectric sensors with a KIAG 10-32 neg. connector.
High-insulating connecting cables, KIAG 10-32 pos. - BNC pos., PFA green
High-insulating connecting cables, KIAG 10-32 pos. - BNC pos., PFA green
1631C
1631C0,5
High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 0.5 m
Price
On Request
Availability
In Stock
1631C1
High-insulating connecting cable, KIAG 10-32 pos. - BNC pos., PFA green, 1 m
Price
On Request
Availability
In Stock
These high-insulating connecting cables are used for piezoelectric sensors with a KIAG 10-32 neg. connector.
High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green
High-insulating connecting cables, KIAG 10-32 pos. - TNC pos., PFA green
1633C
1633CSP
High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, customer-specific length
Price
On Request
Availability
Out of stock
1633C5
High-insulating connecting cable, KIAG 10-32 pos. - TNC pos., PFA green, 5 m
Price
On Request
Availability
In Stock
These connecting cables are low-noise and high-insulation coaxial cables for use in drag-chains. Owing to their own properties, the cables are especially well suited for dynamic use.
Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.
Connecting cables for piezoelectric sensors, highly flexible, KIAG 10-32 pos. or M4x0.35 pos. - KIAG 10-32 pos. or BNC pos.
1900A23
1900A23A2110
Connecting cable for piezoelectric sensors, highly flexible, M4x0.35 pos. - KIAG 10-32 pos., 10 m
Price
On Request
Availability
Out of stock
1900A23A2105
Connecting cable for piezoelectric sensors, highly flexible, M4x0.35 pos. - KIAG 10-32 pos., 5 m
Price
On Request
Availability
Out of stock
The force to be measured must be distributed evenly on the contact surface of the piezoelectric load cell. A force distributing cap ensures an ideal distribution, if a concentrated application of force cannot be avoided.
Force distributing caps for piezoelectrical load cells of Types 9313AAX and 93X1C
Force distributing caps for piezoelectrical load cells of Types 9313AAX and 93X1C
9500A
9500A7
Force distributing cap for piezoelectrical load cell of Type 9371C
Price
On Request
Availability
Out of stock
Flanges for optimum force introduction.
Flanges for optimum force introduction, for piezoelectric load cells Type 93x1C
Flanges for optimum force introduction, for piezoelectric load cells Type 93x1C
9501A
9501A7
Flange for optimum force introduction, for piezoelectric load cell Type 9371C
Price
On Request
Availability
Out of stock
Low-noise, oil-resistant, high-insulation coaxial cables with flexible mechanical protection. Owing to their properties, the cables are ideal for use in harsh machinery environments.
Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.
Connecting cables for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos. or BNC pos.
1900A21
1900A21A12SP
Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - BNC pos., length 0.3 to 20 m
Price
On Request
Availability
Out of stock
1900A21A11SP
Connecting cable for piezoelectric sensors, very sturdy, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.3 to 20 m
Price
On Request
Availability
Out of stock
These smart amplifiers combine analog and digital communication technology, thus paving the way for Industry 4.0.
Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)
Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)
5028A
5028A151
Miniature industrial charge amplifier with IO-Link (mICA), ±100000 pC
Price
On Request
Availability
In Stock
5028A551
Miniature industrial charge amplifier with IO-Link (mICA), ±500000 pC
Price
On Request
Availability
Out of stock
The MiniAmp single channel, industrial charge amplifiers convert the charge signal from piezoelectric sensors into an inverted proportional voltage signal.
Industrial miniature charge amplifiers MiniAmp, ±10 V
Industrial miniature charge amplifiers MiniAmp, ±10 V
5030A
5030A1
Industrial miniature charge amplifier MiniAmp, low range, ±1000 pC
Price
On Request
Availability
In Stock
5030A2
Industrial miniature charge amplifier MiniAmp, medium range, ±10000 pC
Price
On Request
Availability
In Stock
This excellent charge amplifier is suitable for challenging measurements, e.g., in very sensitive low-noise applications with piezoelectric dynamometers.
Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz
Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz
5080A
5080A
Laboratory charge amplifier, multi-channel, low noise, measuring ranges from ±2 to ±2200000 pC
Price
On Request
Availability
Out of stock
These high insulation, low noise coaxial cables are suitable for piezoelectric force, torque and strain sensors.
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos.
1635C
1635C3
Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., 3 m
Price
On Request
Availability
In Stock
1635CSP
Connecting cable for piezoelectric sensors, KIAG 10-32 pos. - KIAG 10-32 pos., length 0.1 to 50 m
Price
On Request
Availability
In Stock
Green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. int. connector
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos.
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos.
1939A
1939ASP
Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., length 0.1 to 20 m
Price
On Request
Availability
Out of stock
1939A3
Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - BNC pos., 3 m
Price
On Request
Availability
Out of stock
The industrial charge amplifiers for manufacturing applications (ICAM) convert a charge signal into an inverted low-impedance analog signal.
Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)
Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)
5073A
5073A111
Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., voltage output ±10 V
Price
On Request
Availability
In Stock
5073A112
Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., current output 4 … 20 mA
Price
On Request
Availability
In Stock
These 1-channel laboratory charge amplifiers are suitable for generic measurement applications with piezoelectric sensors in the laboratory environment.
Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz
Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz
5015A
5015A0000
Laboratory charge amplifier, 1-channel, rack module version, 230 V
Price
On Request
Availability
Out of stock
5015A0010
Laboratory charge amplifier, 1-channel, rack module version, 115 V
Price
On Request
Availability
Out of stock
These are green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. connector.
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos.
1641B
1641BSP
Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., length 0.1 to 50 m
Price
On Request
Availability
Out of stock
1641B5
Connecting cable for piezoelectric sensors, KIAG 10-32 pos. 90° - BNC pos., 5 m
Price
On Request
Availability
At Jul 11, 2024
Green, single-wire, high insulation, PFA based cables (ø2 mm) for sensors with KIAG 10-32 neg. int. connector
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos.
Connecting cables for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos.
1941A
1941A0,5
Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., 0.5 m
Price
On Request
Availability
Out of stock
1941ASP
Connecting cable for piezoelectric sensors, KIAG 10-32 pos. int. - TNC pos., length 0.1 to 50 m
Price
On Request
Availability
Out of stock
These charge amplifiers for low-noise applications are also suitable for engine combustion measurements.
Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz
Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz
5018A
5018A0000
Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC
Price
On Request
Availability
Out of stock
5018A0002
Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC, Piezotron (IEPE) input
Price
On Request
Availability
Out of stock
The digital industrial charge amplifiers are universal devices for piezoelectric sensor signals which allow reliable and precise capture of dynamic and quasi-static processes on modern PLC systems via EtherCat, Ethernet/IP or ProfiNet.
Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet
Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet
5074B
5074B111
Digital industrial charge amplifier (dICA), 1-channel, EtherCat
Price
On Request
Availability
In Stock
5074B112
Digital industrial charge amplifier (dICA), 1-channel, Ethernet/IP
Price
On Request
Availability
In Stock