Laboratory charge amplifiers LabAmp with data acquisition, for dynamic and or quasi-static signals, up to 8 channels / LabAmp

Name: Laboratory charge amplifiers LabAmp with data acquisition, for dynamic and or quasi-static signals, up to 8 channels
Brand: Kistler
SKU: P0000289

实验室电荷放大器 LabAmp 5167A 可测量动态 PE 和 IEPE 信号以及静态和动态电压信号。

The versatile LabAmp charge amplifier family with integrated data acquisition is suitable for quasi-static and/or dynamic measurements with piezoelectric sensors & dynamometers but also Piezotron (IEPE) sensors, or sensors with voltage output.

PTP同步型LabAmp，型号5167A和5165A，用于6个组件的力测量以及与燃烧室内燃烧不稳定性相关的3次压力波动测量。

LabAmp

The versatile LabAmp charge amplifier family with integrated data acquisition is suitable for quasi-static and/or dynamic measurements with piezoelectric sensors & dynamometers but also Piezotron (IEPE) sensors, or sensors with voltage output.

主要特点/优势

Measuring ranges from ±100 to ±1000000 pC
Frequency ranges cover piezoelectric signals down to ≈0 Hz but also up to 100 kHz
Integrated 24-bit data acquisition with up to 200 kSps per channel
Fully flexible low-pass, high-pass, and notch filter adjustment
Analog outputs with fully flexible 2-point scaling and internal routing
Two Ethernet interfaces with included switch functionality
PTP synchronization for data acquisition with multiple devices

The Kistler LabAmp 5165A and 5167A are universal laboratory charge amplifiers for measurement of force, acceleration, pressure, reaction torque and strain using piezoelectric sensors. The dual-mode charge amplifier 5165A measures dynamic PE and IEPE signals as well as static/dynamic voltage signals where the 5167A measures both quasi-static and dynamic signals from any piezoelectric sensor. The Kistler LabAmp provides low-noise measurements with flexible signal conditioning as well as powerful data acquisition with high fidelity data directly to a host computer for further analysis. Multiple LabAmp charge amplifiers can be connected and synchronized without any additional wires. For example, digitized quasi-static forces from a piezoelectric dynamometer can be simultaneously measured with dynamic IEPE accelerometers. This makes the LabAmp product family a modular data acquisition system.