2-axis force and reaction torque transducer, Fz max ±20 kN, Mz max ±200 Nm / 9365B
![9365B 2-axis force and reaction torque transducer, Fz max ±20 kN, Mz max ±200 Nm](https://kistler-test.cdn.celum.cloud/SAPCommerce_Product_345x345/932-006n-02.08_web.webp)
9365B
18007718
- Preloaded and calibrated force-torque sensor, ready to measure immediately
- Calibrated ranges: Fz: 0 … +2 kN, 0 … +20 kN; Mz: 0 … ±20 N·m, 0 … ±200 N·m
- Sensitivity: Fz: ≈ –3,6 pC/N, Mz: ≈ –140 pC/Nm
- Dimensions DxH: 54x60 mm
A pedido
A pedido
Standart Force Sensors
Overload Fz
±24 kNThreshold Fz
<0.35 NTemperature coefficient of sensitivity Fz
–0.02 %/°CCrosstalk Fx,y -> Fz
≤±0.02 N/NRigidity Cz (Fz)
≈2.8 kN/μmCase material
DIN 1.4542This piezoelectric 2-axis force-torque transducer is suitable for measuring a tensile or compression force Fz and a torque Mz acting on the sensor. The high resolution allows measurement of the slightest dynamic changes in large forces and torques at non-rotating shafts. Pressure and shear sensitive quartz disks are integrated under high preload between a hollow preload screw and a nut de signed as the sensor case. Because of the extremely high rigidity of the sensor elements, the components Fz and Mz are measured practically without change of stroke or angle. The force and torque-proportional charge signal is picked up by electrodes and fed via a shielded cable to the charge amplifier. The latter converts the charge signals into proportional output voltages, which can be recorded and evaluated.
Folha de dados
Inglês
pdf
Clique aqui para iniciar sessão no myKistler e será redireccionado.
Manual
2-Component Sensor Fz, Mz
Inglês
pdf
Clique aqui para iniciar sessão no myKistler e será redireccionado.
41 resultados
Tipo de Acessório