Multicomponent dynamometers, 20 kN, cover plate 600x400 mm, with tabbed holes / 9253B12

Multicomponent dynamometers, 20 kN, cover plate 600x400 mm, with tabbed holes
9253B12
18007521
  • Piezoelectric multicomponent dynamometer with maximum forces Fx, Fy ±10 kN, Fz –10 … 20 kN
  • Cover plate 600x400 mm, aluminum, with tapped holes
  • Natural frequency fn (x) 800 Hz, fn (y) 750 Hz, fn (z) 850 Hz
  • Fischer 9-pin flange connector
Bajo pedido
Bajo pedido
Standart Force Sensors
Overload Fz
–15/30 kN
Global attributes
Sensitivity
Fx: -7.8 pC/N, Fy: -7.8 pC/N, Fz: -3.7 pC/N
Threshold
<0.01 N
Operating temperature range
-20 … 70 °C
Hysteresis
≤0.5 %FSO
Degree of protection → EN 60529
IP67
Insulation resistance
>10^13 Ω
Applications
Cutting processes and machining development
Force Sensors (Facets)
Measuring range
Choose the category in which the max force value you want to measure falls in.
-10 … 20 kN
Maximum measuring range
20 kN
Force sensor type
Choose the category depending on the no. of axis you want to measure. A dynamometer is a force plate measuring forces and moments.
Force plate
Dynamometers
Calibrated partial measuring range Fz
0 … 2 kN
Overload Fx, Fy
–15/15 kN
Range Fx, Fy
-10 … 10 kN
Range Fz
-10 … 20 kN
Variation of the sensitivity with a force acting within the top plate Fx, Fy, Fz
±1%
Crosstalk
≤±2%
Rigidity Cx
≈625 N/μm
Rigidity Cy
≈650 N/μm
Rigidity Cz
≈0.250 kN/μm
Capacitance (each channel) Fx, Fy
≈600 pF
Capacitance (each channel) Fz
≈600 pF
Ground isolation
>1e9 MΩ
2-Axis / Triaxial Force Sensors
Sensitivity Fx, Fy
≈–7.8 pC/N
Natural frequency fn(x)
≈0.800 kHz
Natural frequency fn(y)
≈0.750 kHz
Natural frequency fn(z)
≈0.850 kHz
This is a piezoelectric multicomponent force plate for measuring forces and moments. It has a large measuring range and a wide frequency response.
Ficha de datos
Manual
Multicomponent - Force Plate
Inglés
PDF
1.6 MB
PDF, 1.6 MB
0 resultados
Tipo de accesorio