Inicio/Products/Sensores/Sensores de Fuerza/Multicomponent dynamometers, maximum torques up to 200 Nm/9272

Multicomponent dynamometer, Mz max ±200 Nm / 9272

Multicomponent dynamometer, Mz max ±200 Nm
9272
18007552
  • Piezoelectric multicomponent dynamometer with maximum torque ±200 Nm
  • Maximum torque Mz ±200 Nm
  • Natural frequency fn (x), fn (y) 3.1 kHz, fn (z) 6.3 kHz, fn (Mz) 4.2 kHz
  • Fischer 9-pin flange connector
Bajo pedido
Bajo pedido
Standart Force Sensors
Overload Fz
–6/24 kN
Threshold Fz
<0.02 N
Maximum bending moment Mxy
400 Nm
Global attributes
Sensitivity
Fx: -7.8 pC/N, Fy: -7.8 pC/N, Fz: -3.5 pC/N, Mz: -160 pC/N
Threshold
Fx: <0.01 N, Fy: <0.01 N, Fz: <0.02 N, Mz: <0.2 mNm
Operating temperature range
0 … 70 °C
Hysteresis
≤1 %FSO
Degree of protection → EN 60529
IP67
Insulation resistance
>10^13 Ω
Applications
Cutting processes and machining development
Force Sensors (Facets)
Measuring range
Choose the category in which the max force value you want to measure falls in.
-5 … 20 kN
Maximum measuring range
20 kN
Force sensor type
Choose the category depending on the no. of axis you want to measure. A dynamometer is a force plate measuring forces and moments.
Multicomponent dynamomometer
Dynamometers
Calibrated measuring range
0 … 20 kN (Fz 100%)
Measuring range Mz
-200 … 200 Nm
Overload Fx, Fy
±6 kN
Overload Mz
±240 Nm
Sensitivity Fx
≈–7.8 pC/N
Sensitivity Fy
≈–7.8 pC/N
Sensitivity Mz
≈–160 pC/Nm
Threshold Fx, Fy
<0.01 N
Threshold Mz
<0.2 mNm
Crosstalk Fx <-> Fy
≤±2%
Crosstalk Fx,y -> Mz
≤±0.7%
Crosstalk Fz -> Fx,y
≤±1%
Crosstalk Fz -> Mz
≤±0.2 mNm/N
Crosstalk Mz -> Fx,y
≤±0.5 N/Nm
Crosstalk Mz -> Fz
≤±1 N/Nm
Natural frequency mounted on rigid base fn(x,y)
≈3.1 kHz
Natural frequency mounted on rigid base fn(Mz)
≈4.2 kHz
Natural frequency mounted on rigid base fn(z)
≈6.3 kHz
Rigidity cMz
≈0.7 Nm/μrad
Rigidity Cx Cy
≈0.4 kN/μm
Rigidity Cz
≈2 kN/μm
Capacitance Fx, Fy, Fz
185 pF
Ground isolation
>10^8 Ω
Direct Measurement Pressure Sensors
Temperature coefficient of sensitivity
–0.02 %/°C
This is a four-component dynamometer for measuring a torque Mz and the three orthogonal components of a force. The dynamometer has a great rigidity and consequently a high natural frequency. Its high resolution enables the smallest dynamic changes in large forces and torques to be measured.
Ficha de datos
4-Component Dynamometer – for Cutting Force Measurement in Drilling
Inglés
PDF
695.3 KB
PDF, 695.3 KB
Manual
Quartz 4-Component Dynamometer
Inglés
PDF
2.2 MB
PDF, 2.2 MB
0 resultados
Tipo de accesorio