INSPECT - process inspection in fastener assembly

Les systèmes INSPECT de Kistler surveillent, inspectent et documentent l'ensemble du processus de fixation afin d'en garantir la qualité.

Efficient testing of the fastening process allows it to be permanently optimized. In addition, a high level of quality assurance is achieved and productivity is increased. Our INSPECT inspection systems monitor the entire bolting process, check and document all process parameters and provide proof of the quality of the bolted joint.

The electronic torque wrenches are hand tools for fastening and checking bolted joint connections in various procedures. The measured values can be evaluated and archived using the software platforms CEUS and testXpert.

Electronic torque wrenches INSPECTOR

Electronic torque wrenches INSPECTOR

Torque wrench INSPECTOR

The mobile INSPECTpro measuring and evaluation systems are portable and battery-powered units for recording analog and incremental measurands. The (random-sample) tests can be performed, analyzed and documented quickly and effectively and thereby contribute to optimum quality.

Mobile measuring and evaluation system INSPECTpro for process inspection and quality monitoring

Mobile measuring and evaluation system INSPECTpro for process inspection and quality monitoring

Mobile measuring and evaluation unit INSPECTpro

The main applications of the wireless torque wrenches are torque and angle of rotation measurements, as well as the special functions associated with the measuring and evaluation unit INSPECTpro.

Analysis wrenches, wireless handheld torque and angle of rotation wrenches

Analysis wrenches, wireless handheld torque and angle of rotation wrenches

Analyse-Wrench 5413-1500/15-W 15N·m

Analysis wrench, wireless handheld torque and angle of rotation wrench, 15 Nm

Analyse-Wrench 5413-1500/50-W 50N·m

Analysis wrench, wireless handheld torque and angle of rotation wrench, 50 Nm

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V.

Torque sensors with fixed measuring shaft

Torque sensors with fixed measuring shaft

T-Sensor 5413-1030/1 1N·m 1/4"

Torque sensor with fixed measuring shaft, nominal value 1 Nm

T-Sensor 5413-1030/5 5N·m 1/4"

Torque sensor with fixed measuring shaft, nominal value 5 Nm

Analysis wrenches, handheld torque and angle of rotation wrenches

Analysis wrenches, handheld torque and angle of rotation wrenches

5413-1500/15 15Nm

Analysis wrench, handheld torque and angle of rotation wrench, 15 Nm

5413-1500/50 50Nm

Analysis wrench, handheld torque and angle of rotation wrench, 50 Nm

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.

Torque sensors with rotating measuring shaft

Torque sensors with rotating measuring shaft

T-Sensor 5413-1100/1 1N·m 1/4"

Torque sensor with rotating measuring shaft and cable, nominal value 1 Nm

T-Sensor 5413-1100/5 5N·m 1/4"

Torque sensor with rotating measuring shaft and cable, nominal value 5 Nm

The clamping force sensors operate according to the strain gauge principle and supply an analog output signal in mV/V.

Clamping force sensors for coefficient of friction testing of bolts and nuts

Clamping force sensors for coefficient of friction testing of bolts and nuts

5413-1952/100 100kN

Clamping force sensor, nominal value 100 kN

5413-1952/25 25kN

Clamping force sensor, nominal value 25 kN

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.

Torque sensors with rotating measuring shaft and hex connection

Torque sensors with rotating measuring shaft and hex connection

T-Sensor 5413-1151/5 5N·m 1/4"6kt

Torque sensor with rotating measuring shaft, hex drive and cable, 5 Nm

T-Sensor 5413-1151/10 10N·m 1/4"6kt

Torque sensor with rotating measuring shaft, hex drive and cable, 10 Nm

These torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque sensors with integrated angle of rotation measurement are optionally available as torque and angle of rotation sensors.

Torque sensors with rotating measuring shaft in slim design

Torque sensors with rotating measuring shaft in slim design

T-Sensor 5413-1160/1 1N·m 1/4"

Torque sensor in slim design, with cable, nominal value 1 Nm

T-Sensor 5413-1160/2 2N·m 1/4"

Torque sensor in slim design, with cable, nominal value 2 Nm

The torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque and angle sensors have an integrated angle of rotation measurement.

Torque and angle of rotation sensors with rotating measuring shaft

Torque and angle of rotation sensors with rotating measuring shaft

T/Ang-Sensor 5413-1200/1 1N·m 1/4"

Torque and angle of rotation sensor with rotating measuring shaft and cable, 1 Nm

T/Ang-Sensor 5413-1200/2 2N·m 1/4"

Torque and angle of rotation sensor with rotating measuring shaft and cable, 2 Nm

Le logiciel testXpert de Kistler a été spécialement conçu pour réaliser des essais documentés et conformes aux normes sur les assemblages boulonnés.

Windows software testXpert for bolted joints testing

Windows software testXpert for bolted joints testing

testXpert-Software

Software update testXpert®-

Software testXpert, update

Software testXpert for bolted joints testing

The torque sensors operate according to the strain gauge principle and supply a passive analog output signal in mV/V. The torque and angle sensors have an integrated angle of rotation measurement.

Torque and angle of rotation sensors with rotating measuring shaft with hex connection

Torque and angle of rotation sensors with rotating measuring shaft with hex connection

T/Ang-Sensor 5413-1251/5 5N·m 1/4"6kt

Torque and angle of rotation sensor with rotating measuring shaft, hex drive and cable, 5 Nm

T/Ang-Sensor 5413-1251/10 10N·m 1/4"6kt

Torque and angle of rotation sensor with rotating measuring shaft, hex drive and cable, 10 Nm