Piezoelectric force sensor, ring force transducer (Fz 190 kN / 42.7 klbf) / 9105C
9105C
18037376
- Piezoelectric force sensor with a measuring range of Fz: 0 ... 190 kN (42.7 klbf)
- Dimensions D x d x H: 40.5 x 21 x 13 mm
- Connector: KIAG 10-32 neg.
- Tested, uncalibrated
De 10 juil. 2024
Sur demande
Se connecter à myKistler pour voir les prix
Standart Force Sensors
Nominal force
190 kNLoad limit
210 kNMaximum bending moment
618 NmTemperature sensitivity
±1.5 %Repeatability
0.05 %Reproducibility
0.13 %Torsion stiffness
18469 Nm/°Insulation resistance
≥5*10^13 ΩSensor material, cover plate
1.4821Sensor material, coat
1.4542Piezoelectric force sensor, also known as piezoelectric ring force transducer, for precise measurement of tensile and compressive forces in highest resolution. The force sensor is thoroughly tested but delivered without calibration certificate and must be calibrated on site after installation.This piezoelectric (PE) force sensor of the 910x family measures forces in the z-direction. These ring force transducers contain a quartz sensor element which measures the force directly transferred to the quartz element located within the sensor. When subjected to a mechanical load, quartz produces an electric charge that is proportional to that load. An outstanding property of quartz is the very low threshold, resulting in a high sensor sensitivity which is extremely linear over the entire measuring range. Thus the behaviour in a certain measuring range is practically identical for all PE sensors, independent of their size.
Fiche de données
Anglais
PDF
379.5 KB
PDF, 379.5 KB
Veuillez cliquer ici pour vous connecter à myKistler et vous serez redirigé.
Manuel
Piezoelectric Force Sensors, Ring Force Transducers
Anglais
PDF
2.5 MB
PDF, 2.5 MB
Veuillez cliquer ici pour vous connecter à myKistler et vous serez redirigé.
Résultats 128
Type d'accessoire