Cavity pressure sensor, contact-free measuring, M5, with single-wire cable (length 1.5 m) and connector Type 1839 / 9247AE

Cavity pressure sensor, contact-free measuring, M5, with single-wire cable (length 1.5 m) and connector Type 1839

9247AE

ID:18007510

Cavity pressure sensor for contact-free measurement of high pressures
Cavity pressure measurement behind the cavity wall, without imprint on the plastic part
Indirect measurement of injection pressure in the nozzle
Compact installation size

Disponibilité

Sur demande

Prix de liste Sur demande

Global attributes

Pressure sensor type

Contactless cavity pressure sensors

Operating temperature range

-40 … 200 °C

Hysteresis

≤3 %FSO

Output signal type

Charge (Piezoelectric, PE)

Degree of protection → EN 60529

IP65

Insulation resistance

≥10^13 Ω

Weight (without cable)

2.5 g

Applications

Monitoring and control in injection molding

Strain sensors (facets)

Strain sensor type

Longitudinal strain measuring pin

Strain Measuring Pins

Axial preloading force pC

≈–20000 pC

Axial preloading force kN

≈3.3 kN

Range with preload, nominal

-1400 … 1400 με

Maximal acceleration sensitivity

0.07 pC/g

Repeatability of sensitivity after demounting and remounting

–1,1%

Sensitivity in test object

≈–8.6 pC/με

Sensitivity to force for preload

≈–6 pC/N

Weight without cable and preloading bolt

2.5 g

Strain Sensors

Measuring range (µε)

-1400 … 1400 με

Natural frequency fn

>200 kHz

Direct Measurement Pressure Sensors

Overload

±2000 με

The Type 9247AE strain measuring pin measures forces of almost any size indirectly though strain. Pre-loaded for measurement of tensile as well as compression forces, it can be mounted at virtually any depth in the structure.

Fiche de données

Longitudinal Measuring Pin M5 – for contactfree measurement of cavity and injection pressures

Anglais

PDF

580.5 KB

PDF, 580.5 KB

Veuillez cliquer ici pour vous connecter à myKistler et vous serez redirigé.

Résultats 55

Type d'accessoire

The industrial charge amplifiers for manufacturing applications (ICAM) convert a charge signal into an inverted low-impedance analog signal.

Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)

Industrial charge amplifiers for manufacturing applications (ICAM), 1 to 4 channels (±10 V / 4 … 20 mA)

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., voltage output ±10 V

Industrial charge amplifier for manufacturing applications (ICAM), 1-channel, BNC neg., current output 4 … 20 mA

These 1-channel laboratory charge amplifiers are suitable for generic measurement applications with piezoelectric sensors in the laboratory environment.

Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz

Laboratory charge amplifiers, 1-channel, measuring ranges ±2 to 2200000 pC, frequency range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, rack module version, 230 V

Laboratory charge amplifier, 1-channel, rack module version, 115 V

These charge amplifiers for low-noise applications are also suitable for engine combustion measurements.

Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifiers, 1-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC

Laboratory charge amplifier, 1-channel, low noise, rack module version, 230 V, BNC, Piezotron (IEPE) input

The digital industrial charge amplifiers are universal devices for piezoelectric sensor signals which allow reliable and precise capture of dynamic and quasi-static processes on modern PLC systems via EtherCat, Ethernet/IP or ProfiNet.

Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet

Digital industrial charge amplifiers (dICA), 1 to 4 channels, Industrial Ethernet

Digital industrial charge amplifier (dICA), 1-channel, EtherCat

Digital industrial charge amplifier (dICA), 1-channel, Ethernet/IP

These smart amplifiers combine analog and digital communication technology, thus paving the way for Industry 4.0.

Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)

Miniature industrial charge amplifiers (mICA) with IO-Link, (±1 … 10 V)

Miniature industrial charge amplifier with IO-Link (mICA), ±100000 pC

Miniature industrial charge amplifier with IO-Link (mICA), ±500000 pC

The MiniAmp single channel, industrial charge amplifiers convert the charge signal from piezoelectric sensors into an inverted proportional voltage signal.

Industrial miniature charge amplifiers MiniAmp, ±10 V

Industrial miniature charge amplifiers MiniAmp, ±10 V

Industrial miniature charge amplifier MiniAmp, low range, ±1000 pC

Industrial miniature charge amplifier MiniAmp, medium range, ±10000 pC

This excellent charge amplifier is suitable for challenging measurements, e.g., in very sensitive low-noise applications with piezoelectric dynamometers.

Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifiers, multi-channel, low noise, measuring ranges ±2 to ±2200000 pC, freq. range ≈0 … 200 kHz

Laboratory charge amplifier, multi-channel, low noise, measuring ranges from ±2 to ±2200000 pC